Knowledgebase
Two notes Audio Engineering Help Desk > Knowledgebase

Ask a question:


Can I use the Torpedo C.A.B. with an amplifier?

Solution

If you have a guitar or bass amplifier, you have two options to make it work with the TORPEDO C.A.B.:

1. Plug a loadbox into the speaker out, then the loadbox uncompensated Output to the TORPEDO C.A.B.. Avoid any speaker simulation before the TORPEDO C.A.B.. Depending on the output impedance and level of the loadbox try both INPUT LEVEL selector positions to find the appropriate Input level.

2. Use the FX loop of the amplifier, plug the Send Output into the TORPEDO C.A.B.. Depending on the output impedance and level of the FX loop Output try both Input selector positions to find the appropriate Input level. If you want to send the TORPEDO C.A.B. to the Return Input of your amplifier, try both OUT LEVEL selector positions to find the appropriate level.

When using the TORPEDO C.A.B. with an amplifier, we recommend switching OFF the Power Amp
simulation section.

 
Was this article helpful? yes / no
Article details
Article ID: 119
Category: Torpedo C.A.B.
Date added: 2013-05-20 12:22:42
Views: 1227
Rating (Votes): Article rated 2.6/5.0 (10)

 
« Go back

 
Powered by Help Desk Software HESK - brought to you by Help Desk Software SysAid