Knowledgebase
Two notes Audio Engineering Help Desk > Knowledgebase

Ask a question:


» Category: Torpedo Live  (Go back)

» Articles in this category:

 
What is the Torpedo Live? Article rated 3.0/5.0
The Torpedo Live is a speaker and microphone simulator. It makes the process of recording an amplifier easier. The classic way of recording an amplifier normally implies plugging the amplifier into a...
What are the benefits of registering my Torpedo Live? Article rated 3.0/5.0
The Torpedo Remote is a software specificially designed to remotely control Torpedo CAB, Live and Studio devices. If you only need to control remotely the parameters of your digital hardware Torpedo,...
How to register my Torpedo Live? Article rated 2.6/5.0
The Torpedo Remote software and an online computer are required to register your Torpedo Live on your Two notes account. Here are the instructions to follow: First, download the Torpedo Remote se...
Can the Torpedo Live simulate more than one mic at a time? Article rated 3.7/5.0
The Torpedo Live can simulate only one miking setup (PA/Cab/Mic) at a time. If you want to simulate two speaker cabinets and two microphones, see the Torpedo Studio. However, with the Torpedo Live co...
Does the Torpedo Live simulate an amplifier? Article rated 3.0/5.0
The Torpedo Live is not an amplifier simulator. It is a speaker-cabinet and miking simulator. It requires a guitar or a bass amplifier and allows you to record that amplifier directly, by simulating...
What differences are there between the Torpedo VB-101 and Torpedo Live? Article rated 3.2/5.0
The comparison chart here will give you the technical differences: Two Notes Product Comparison Chart Sound-wise, the differences will have to do with: the type of loadbox (resistive + Load Compe...
Can I send the signal from the Torpedo Live at the same time to my PA and to a speaker-cab? Article rated 1.8/5.0
Yes, the THRU, S/PDIF and LINE outputs can be used simultaneously. When you plug a cabinet to the THRU output, the impedance of this cabinet is the one that your amplifier sees. In other words, with ...
How does overheating protection work on the Torpedo Live? Article rated 3.7/5.0
The TORPEDO Live embeds a temperature-monitoring system and an active security load to prevent any and all damage that might be caused to either user or product by overheating or by some improper use ...
Does the USB port transmit any audio signal? Article rated 3.0/5.0
No, it doesn't. The USB interface is a remote connection for the Torpedo Remote Software: you can control all the parameters of the Torpedo, upload and manage new cabinets, upload new firmware when ne...
Can I connect the Torpedo Live to an external cabinet and play at low volume? Article rated 2.3/5.0
This would be the role of an attenuator, such as the Torpedo Reload.  The Torpedo Live will give you a line output but no control over the cabinet that you would plug into the THRU output (chec...
Can I use both Line and Amp inputs at the same time? Article rated 4.6/5.0
It is not possible to be using both Line and Amp inputs at once. On the Torpedo Live the Line input is designed to receive a guitar/bass preamplifier as a source, and it gets physically activated by ...
Is the Torpedo Live mono or stereo? Article rated 3.7/5.0
The Torpedo Live is Mono In / Mono Out. On the S/PDIF digital output with 2 channels, one channel is for the dry signal (i.e., with no simulation), and the other channel is for the wet signal (with s...
How does the Output mode works on Torpedo Live? Article rated 2.5/5.0
The output parameter can be accessed through: Setup Menu/Output (parameter 6/9) The Torpedo Live is a mono unit, but the S/PDIF digital output carries 2 channels: the Wet (meaning with speaker simul...
How can I add new Two Notes cabinets to my Torpedo? Article rated 3.0/5.0
The Torpedo cabinets can be used in Torpedo Wall Of Sound III plugin and Torpedo VB-101, Studio, Live and C.A.B. devices once uploaded by the Torpedo Remote control software. For every purchase of ne...
What to do if I get a "System Error 67.0" on my Torpedo Live ? Article rated 2.3/5.0
The System Error 67.0 is a memory corruption error that may happen when updating from the v1 to the v2 and v3 firmware on the Torpedo Live and CAB. The solution is to install an alternative firmware t...
How does the fan of the Torpedo Live work ? Article rated 3.0/5.0
The fan of the Torpedo Live is controlled by the temperature monitor of the unit. The fan is turned on when the temperature reaches a threshold which depends on the room temperature and the power comi...
Wie funktioniert der Überhitzungsschutz am TORPEDO Live? Article rated 3.0/5.0
Zum Schutz vor Verletzungen oder Gerätebeschädigungen, die durch Überhitzung oder unsachgemäßen Gebrauch in Verbindung mit Gitarren- oder Basseverstärkern entstehen k&ou...
What to do if I get a "System Error 24.0" on my Torpedo Live ? Article not rated yet
  The System Error 24.0 is a boot error that could occur on a few of the earliest versions of the Torpedo Live and Torpedo CAB. Basically, it means the processor of the device doesn't boot prope...
Torpedo Live MIDI Map Article not rated yet
The current, up-to-date MIDI Map of the Torpedo Live can be downloaded here :
 

 
Powered by Help Desk Software HESK - brought to you by Help Desk Software SysAid