Two notes Audio Engineering Help Desk Knowledgebase English
Torpedo series
Suggested knowledgebase articles:

Knowledgebase English Torpedo series

Torpedo Wireless Remote
Torpedo VB-101
Torpedo Live
Torpedo C.A.B.
Torpedo Remote
Torpedo Reload
Torpedo Wall of Sound
Torpedo BlendIR
Connection diagrams
Torpedo Studio
Torpedo Captor
Torpedo C.A.B. M
Torpedo Captor X

Articles in this category

Sound is coming from inside the box of the Torpedo, is that normal?

When you play your amplifier through a Torpedo product which embeds a reactive loadbox (Torpedo Live, Studio, Reload, Captor), you may hear the sound of your instrument coming out of the box of the To...
Can I use an amplifier more powerful than the rated power of a Torpedo product ?

In short : Yes, you can use an amplifier more powerful than the rated power of a Torpedo product. With a Torpedo Studio or Reload, you can use an amplifier rated for more than 150W. With a Torpedo Li...
What to do if I hear unwanted distortion with a Torpedo product ?

When getting an unwanted distortion from your signal chain, the first thing to do is to figure out where it comes from. This can be tricky because most of the products we use when playing the electric...
Can I mismatch the impedance of the amp and loadbox ?

The speaker output of a tube amp is designed to be matched to one (or several) specific load(s). A 8 ohms speaker output is supposed to be connected to a 8 ohms speaker or loadbox. In some situations ...
I cannot hear the cab sim in my physical cabinet - why?

When you use a Torpedo equipped with cabinet simulation (Captor X, Captor, Live, Studio, C.A.B. M) and your amp with a cabinet, you will not hear the Torpedo cab sim in your cabinet. For Torpedo Capto...
Mixing a real cabinet miking and a Torpedo Loadbox

On stage or in the studio, you may need to feel the sound coming out of a cabinet. You can simply connect a cabinet to the THRU output on your Torpedo Digital Loadbox. You will be able to hear the sou...
What is a loadbox?

What is a loadbox? In the normal use of a tube amplifier, it is highly recommended that you always connect its power output to a speaker cabinet prior to powering it up. The speaker cabinet (2, 4, 8 ...
How does the Reverb effect work ?

This article describes the Reverb effect shared by the Torpedo Studio and Torpedo Wall of Sound. The main goal of the Reverb effect is to enhance your experience with your Torpedo product, especially ...
How does the Exciter effect work ?

This article describes the Exciter effect shared by the Torpedo Studio and Torpedo Wall of Sound. This very useful tool is a simple and effective way to quickly add what your tone may be missing. &nb...
How does the Parametric EQ effect work ?

This article describes the Parametric EQ effect shared by the Torpedo Studio and Torpedo Wall of Sound. Inherited from both the former Low Cut and EQ effects of the Torpedo Studio and WoS, this brand ...
How to test the loadbox of a Torpedo product

The loadbox design in the Torpedo products are the result of years of development with, among other things, reliability in mind. As a result, they are pretty sturdy circuits, and they very rarely fail...
How to restore the factory settings of a Torpedo device

This procedure describes how to restore the factory settings (ie, do a factory reset) of a Torpedo Captor X, C.A.B M+, Studio, Live or C.A.B. This procedure doesn't apply to the Torpedo Reload and Cap...
What to do if I get a high pitch squeal when using a Torpedo ?

When using a Torpedo product with a loadbox (Torpedo VB-101, Studio, Live, Reload or Captor), you may experience a particular type of high pitch squeal, similar to an acoustic feedback (which happens ...
Can I use a Torpedo product with a transistor amplifier ?

The Torpedo products featuring a loadbox (Torpedo VB-101, Studio, Live, Reload, Captor) can be used with amplifiers, as direct replacement for a speaker cabinet. See here for more details.  
How to manually update my Torpedo hardware product ?

The update process of the Torpedo hardware product is an automated process. When an update is available, the Remote software will let you know, and invite you to do the update. On some occasions howe...
Latency compensation of digital Torpedo products

The lists below give the value, in samples, of the latency compensation delay that can be used to compensate the latency of digital Torpedo product.   Torpedo Live and C.A.B. Firmware v3: 4...
How to read an LED Error Report

  Some Torpedo products are equipped with a display, which is used to control the device, and to display a report when an error is detected in the firmware. Some other products don't have a display, s...
How to handle errors in hardware Torpedo products

Many hardware Torpedo products are digital products that works with a firmware (Torpedo CAB M, Captor X...). A lot of effort is put into making this firmware as bug-free as possible, but problems can ...
List of errors for hardware Torpedo products

This article lists the known errors for hardware Torpedo product, what they mean, and what to do about them. For more information about what errors mean and how to deal with them, see this article. If...
How to use a Captor X / Captor with a Vox AC10

The vox AC10 C1 has a External Speaker output at the back of the amp. It is a 16 ohms output. When it is connected to a cabinet or a load box, the internal speaker is muted. Connect the Captor x (16) ...
Using Torpedo Support Tool

(Version française) Torpedo Support Tool is a software allowing you to recover Torpedo devices when Torpedo Remote fails to update the unit or connect to the unit. Setup To install the software, downl...
Copyright © 2020 Two notes Audio Engineering. All rights reserved.
Two notes Audio Engineering is a registered trademark of OROSYS SAS.