Knowledgebase
Two notes Audio Engineering Help Desk > Knowledgebase

Ask a question:


How does overheating protection work on the Torpedo Live?

Solution

The TORPEDO Live embeds a temperature-monitoring system and an active security load to prevent any and all damage that might be caused to either user or product by overheating or by some improper use of the TORPEDO Live with a guitar or bass amplifier.

When the TORPEDO Live is OFF, the loadbox is not running, the Speaker Input is wired to a 220-Ohm security load.

When the TORPEDO Live is ON, an active switch relay activates the loadbox so the amplifier "sees" the nominal 8-Ohm reactive loadbox. The DC impedance of the reactive loadbox is set around 25 Ohms.

When you are playing with your amplifier, the power sent to the TORPEDO Live is turned into heat. The purpose of the high-quality Maglev fan placed at the back of the TORPEDO Live is to extract that heat and cool the unit down.

At first, the fan will run slowly (or not at all), and it will start rotating as soon as the temperature is high enough. That way, you can operate in silence by choosing a proper amount of power (the output volume) on your amplifier.

Two things may happen while you are playing:

1- If the power is cut down on the TORPEDO Live, it will instantaneously switch to the security load, which is safe for your amplifier(*).

2- If the TORPEDO Live is overheating, the unit will switch to the security load. A message appears on the screen: "Too hot, stop playing!" The sound will be lowered by 12 dB so you can notice the problem even if you are not in front of the machine.

Once on the security load, your amplifier will see higher impedance and stop sending too much power. An amplifier can stand a higher impedance rating but we recommend bypassing the power amplifier as soon as possible. Let the TORPEDO Live cool down to a proper temperature, and the warning notice will disappear as soon as the temperature is back to normal.

In case you go on playing, the sound is switched off until the temperature gets back to normal.

(*) You should not be playing when on the security load. Your amp is safe when powered up on the security load, but it is nonetheless unsafe to play on the security load over a long period of time.

Please go to TwoNotesTV for a video demo of this.

 
Was this article helpful? yes / no
Article details
Article ID: 57
Category: Torpedo Live
Date added: 2012-11-23 11:10:13
Views: 826
Rating (Votes): Article rated 3.4/5.0 (5)

 
« Go back

 
Powered by Help Desk Software HESK - brought to you by Help Desk Software SysAid